Brick Paver Installation & Edging



Staging of product

A lot of paver projects will differ depending on access, website conditions, task size and of course, the weather. Mindful consideration should be taken to figure out the time to start the paver installation.

The supervisor or project manager need to always have the products (sand/ pavers) distributed around the task site for efficient and simple installations. Paver pallets/bundles ought to be positioned in a manner not to hinder the paver installation. The proper pallet/bundle placement can make the real task installation simpler and quicker by lowering the overall labor of dealing with the product.

Brick paver patterns

Pavers can be placed in several patterns depending on their shape. Each paver shape will usually have a number of various hatch patterns that are provided by the producer.

Specialists require to take into consideration the traffic weight loads on their paver jobs. In a lot of applications around the world, it has actually been shown that pavers laid in a herringbone pattern have performed effectively.

Pavers that are 60 mm (2 - 3/8 in) thickness are suitable for pedestrian applications. Pavers that are going to be used in business or commercial applications must be 80 mm (3 - 1/8 in) in density.

Reference/starting point for brick paver installation

There are a number of conditions that determine the starting point of a paver job.

When beginning to set up pavers it is best to snap a true straight chalk line on the surface of the bedding sand or pull a true straight string line above the surface area of the bed linen sand at the ended up elevation of the pavers This will help as a guide for maintaining straight joint lines and will also enable the installer to make changes in the alignment of the pavers.

Buildings and concrete curbing are generally not straight and ought to not be utilized for developing straight joint lines. The usage of string lines is vital to determine the true straightness of the edge. As the paver installation progresses, the string lines will assist decrease the requirement for little trim pieces.

These will keep a minimum joint width and permit the bedding and jointing sand to enter in between each paver. Pavers with spacer bars are usually not laid in snug versus each other since a string line will provide consistent joint spacing.

Installation of brick pavers.

One of the most widely used techniques for the installation of pavers is hand installation of each paver. It is best to install a single row of pavers along among the true straight lines that you have actually pulled or above the bed linen sand. This will offer you a true and straight line off which to work. Once this row is established, you can continue to work outside into the field with the rest of the pavers. Constantly ensure to regularly inspect your joint lines to make sure they are straight and real. If not, modifications to the pavers can be made as you continue setting up. Pavers needs to be set up hand tight. The very best approach is to position a paver versus another one and let it slide down into the bedding sand. Do not kick or tap the pavers into location as this can throw your lines out of true straightness.

When installing pavers on a steep grade, they should be set up at the base of the grade going uphill. This will avoid the pavers from sneaking as they are being laid.

The finest method for setting up pavers on big jobs is to install them mechanically. There are a couple items a contractor should think about prior to setting up pavers mechanically:

1.) Mechanical installers are only capable of installing pavers in particular patterns.

2.) The specialist should ensure that the manufacturer is capable of production and bundling pavers in the wanted pattern on the pallets for simple mechanical installation.

3.) Professionals may encounter a color mixing scenario coming off the packages of pavers Poor color blending could lead to an irregular looking installation. A lot of producers are consistent with color blending on each bundle of pavers, however it is the specialist's obligation to ensure proper mixing in the field.

Cutting procedures for brick pavers.

Professionals generally have 2 methods of cutting pavers. When cutting pavers wet, it will assist reduce dust and will prolong the diamond blades life. The operator of the brick saw need to always cut the pavers away from the surface area of the paver field when cutting damp, due to the fact that the pavers will develop a slurry that will stain the paver surface.

The brick saw operator should constantly wear the correct security that is needed for running a saw, such as eye, ear, respiratory and hand protection ).

Edging types

Edge restraints play a significant function in the overall success of an interlocking pavement installation Edging restraints eliminate lateral motion of the pavers and hold the pavers firmly together. Specifically at the external perimeter of the paver application, without an edging restraint, your task is guaranteed to stop working in time.

There are several various edging restraints from which contractors can pick. Generally made edge Paver Installation Boca Raton restraints are the most typically utilized by professionals. Made edging restraints can range from, plastic edging, steel and aluminum, lumbers or precast concrete and stone. An edging type that is utilized primarily in industrial and industrial applications is poured-in-place concrete curbs. This edging restraint is usually installed by other professionals.

Edging installation.

When installing your edge restraint, it should rest straight on top of the compacted gravel base. The compacted gravel base course need to extend a minimum of 6in beyond the border of the pavers This will offer a correct foundation upon which the edging restraint can sit. Made edging (i.E. Plastic, steel or aluminum) should be strongly anchored into the compacted gravel base( talk to the maker's literature for the suggested spacing of the spikes). There are some edging restraints that will extend much deeper into the gravel base or beyond the base course (i.E. Timbers or poured-in-place curbs ). Edging restraints ought to never ever be placed straight on top of the bed linen sand. This could lead to the migration of the bedding sand and eventual lateral motion of the pavers. Geo textile material is recommended if there is a possibility of losing bed linen sand in between the pavers and the edge restraint. When a gap in between the pavers and the edging goes beyond 3/8" (10mm), then the space must be filled with cut pavers. All edging applications should be appropriately back filled after they are set up to help offer extra stability.

Compaction of brick pavers.

After installation, the pavers need to be compressed. The entire location that is to be compacted need to be swept clean of any foreign things and debris that can cause scuffing or scratching on the surface of the pavers.

In addition, it is important that the first compaction takes location prior to any jointing sand has been used to the pavers. If jointing sand is used to the pavers before compaction takes place, this can cause a bridging issue and will not permit the joints to be completely filled with jointing sand. This can also avoid the pavers from being effectively set into the bed linen sand.

When compacting the pavers, it is suggested that you make a minimum of 2 passes in various directions across the pavers. This will enable the pavers to be appropriately embeded in the bed linen sand and will force the bedding sand up into the joints from the bottom of the pavers.

The compaction of the pavers is very vital to the last efficiency of the pavers. Failure to do correct compaction can result in deformations and pavement failure in time.


Paver pallets/bundles need to be placed in a manner not to interfere with the paver installation. One of the most commonly used techniques for the installation of pavers is hand installation of each paver. The operator of the brick saw need to constantly cut the pavers away from the surface of the paver field when cutting wet, due to the fact that the pavers will produce a slurry that will stain the paver surface. Edging restraints get rid of lateral motion of the pavers and hold the pavers securely together. When a space in between the pavers and the edging surpasses 3/8" (10mm), then the area must be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *